Sandi MacIver – Stampin With Sandi – How to Create a Bridge Card.
Hi stamping friends, happy weekend to you. My share today is How to create a Bridge Card. They are all the rage right now and who doesn’t like a new folding card right? So check out the details and the video below, I even created a printable PDF file for you – have fun!
I think, when standing the BRIDGE CARD somewhat resembles a Diorama Card, and also how it folds flat to fit perfectly inside one of our Stampin Up Envelopes too.
Please note – Couple of Corrections in the video:
at 12:59 I say the bridge is 1-3/8 long – it’s 5-3/8 long, and I added that change in LARGE BLACK letters right in the video.
I also say I used the Merry Little Christmas DSP – however, I changed it at the last minute, as I ran out of it, and forgot to change my notes, Sorry about both those errors.
In the video I share some tips on how place the dies to extend the cuts so the bridge is long enough, how to add the “lights” to the windows, and how to cut the designer paper so there is NO WASTE, and you can get 4 of these cards from one 12 x 12 sheet.
Create a sophisticated color combo by adding Gold Foil Sheet to the beautiful NEW Merry Little Christmas Designer Paper from the upcoming Stampin’ Up! Holiday catalogue.
Click the image below to watch the video. If you are reading this post in your e-mail, you may need to “click here” to come to my blog to view the video.
and for those of you who love to receive the measurements of die sets, here is an image with the measurements included for you. You can click on the image to pin it or to save it to your computer.
|
|
||
|
|
||
|
|
|
Amy Koenders says
August 19, 2017 at 4:47 pmThat’s awesome Sandi! Can’t wait to go check out the video, love your design! Thanks for sharing the details for making it! 🙂
sandimac says
August 19, 2017 at 5:22 pmYou are so welcome Amy, I know you will make something fabulous with it
Mz Cookie says
August 19, 2017 at 5:38 pmIt’s all your fault that I’m getting this bundle….lol. Very cute….
Glenna says
August 19, 2017 at 6:31 pmI can’t wait to try this card. I have the Bundle,so all I need is time. I really appreciate the Video. You make it very clear. Thanks for this awesome card and video.
Chris R. says
August 19, 2017 at 10:11 pmWhat a cute card, Sandi!! Thanks so much for the great video tips!
sandimac says
August 20, 2017 at 5:13 amthanks so much Chris, so glad you enjoyed it
Linda says
August 20, 2017 at 3:46 pmThis was a great video and I love the design of this card! I wasn’t going to get this edgelit set but now that I’ve seen your video I will have to get it to make this card for Christmas! Thanks so much!
sandimac says
August 20, 2017 at 4:51 pmThanks so much Linda and yes you need the edgelits, LOL., they are absolutely awesome to work with
Debby says
August 20, 2017 at 5:39 pmThis is awesome. Thank you for sharing the tutorial!
sandimac says
August 21, 2017 at 5:55 amthanks Debby, you are so welcome
Sue McNeill says
August 20, 2017 at 8:28 pmWhat a lovely card. I followed the video to make one. I did not have the right DSP, but the thinlit of stars worked quite well. My one concern is on the video when you are measuring across to determine how to shorten the strip with the houses in front, you hold up a ruler and you say, “it measures 1 3/8” when it must measure closer to 5 1/2 across. This might be confusing to some people. Laying flat it fits in our envelopes. Thanks for posting the video. Loving this holiday catty.
Sue McNeill,
Eagan, MN USA
sandimac says
August 21, 2017 at 5:52 amHi Sue, Yes, I made a mistake! that’s why I wrote the correct measurement right above it in the video in BIG black letters and counted off the 5-3/8 on the ruler.
Sue McNeill says
August 21, 2017 at 1:17 pmSorry….I was probably measuring and listening….not watching the screen. I was intent on making this card! Just love it!!!!
Carol Walker says
August 22, 2017 at 2:52 pmFor the card to lie flat, my bridge has to be 5 1/2″, too. But it works beautifully with that small adjustment. Lovely card.
sandimac says
August 23, 2017 at 6:36 amyep, some are and some are not, I think it depends on how bulky the inside of your card is
sandimac says
August 23, 2017 at 6:38 amHi Carol, yes, it depends on how thick your center is, and how close you cut the sides to the edge of the card, if you left a small gap and cut on the inside of the fold line as I did, then the 5-3/8 works perfectly, if it’s a little bulkier, than 5-1/2 works better.
Heather Price says
August 20, 2017 at 9:06 pmI knew these edgelits were going to be coming my way in my next order! Thanks Sandi for the great video. Love your card. Can’t wait to try it!
sandimac says
August 21, 2017 at 5:53 amthanks Heather, so glad you liked it
Karen says
August 21, 2017 at 12:53 amHi Sandi love the card and your instructions. You made the directions so easy to follow. What is “new paste” and where did you purchaase it?
sandimac says
August 21, 2017 at 5:54 amHi karen, it’s the new Embossing Paste, page 201 of the annual Stampin Up Catalogue
Deepa M. says
August 21, 2017 at 9:54 amLOVE this card! That bundle is on my wishlist, and I can’t wait to duplicate your fun card. The instructions are super easy, and the base seems to go together in a flash. Thanks so much for the video – love seeing how you put things together and hearing all your tips.
sandimac says
August 21, 2017 at 1:44 pmaw, thanks sweet friend.It does go together super easy, cut the die pieces is the hardest part….and I know you will love this bundle
Barbara Moore says
August 21, 2017 at 5:29 pmThank you so much for the video! Your card turned out fantastic!
sandimac says
August 22, 2017 at 6:41 amthanks Barbara, so glad you enjoyed it
Bonnie says
August 25, 2017 at 9:54 amAwesome card! Thanks again Sandi for the card and the video.
sandimac says
August 28, 2017 at 6:47 amyou are so welcome Bonnie
Jo Soper says
September 5, 2017 at 8:19 pmLove this card so much, I know I will be making many of them.
sandimac says
September 6, 2017 at 7:04 amawesome Jo, so glad you liked it, happy colouring